randyah96 wrote:

bhfoust wrote: Sorry guys I missed the meeting, I have had a day for the books. First I wake up and find out its Monday...ikr. Get in my jeep to leave for work...dead battery (daughter did shut door). So this is like the forth time, battery is shot. New battery while installing new battery I snapped the hose barb off of the stupid PLASTIC SIDE TANK. I'm still somewhat calm, needed a new radiator anyway. This is where having no friends gets you in a bit of a bind, the closest store to have radiator in stock is 8 miles away (I only have one vehicle). So my wife calls her STUPID, LAZY, GOOD FOR @$&$# friend. Who didn't show up until4:30 (missed a day of work brunt a day of vacation). She run out of gas two blocks from parts store (I'm highly pissed now). My blood pressure was up and out comes the Foust. Finally get home with new radiator and of course nothing is going right, tools are flying sticking in the drywall....then I get to the transmission cooling lines. Why would they put a quick release fitting on a trany line, its not a race car. Why would they call it a quick release, when there is nothing quick about it (takes a special tool that I don't have). So my stress is so high right now my hands will not stop shaking. my wife worries I'm going to end up in the hospital, and I still cant get the hose apart grrrrrrrr. I don't see tomorrow being much better, getting to work should be fun. Sorry again for missing the meeting.

np man and your wrong about the friends we are ur freinds / family brother and my day has been preety crappy too to big if a story to explain i posted it on the last page if u wanna see your sounds worse though sorry bh good news though you will be moraf in no time!!

Hope your stress level goes down soon and don't let your wife worry about you to much and don't end up in the hospital

Ouch randy are you going to be ok bro. I took a baseball to the eye as a teenager, it shattered the lens of my glasses and put a L shape laceration on my cornea. All the fuid in my eyball draind out and took 9 stitches. I had to stay awake for that it was horrifying to experience. You guys and gals are great friends glad to know every one of ya.

Karma bumb for u Foust.

Sounds like a day, all right.

I coined a phrase at my old job for when I'd see a rookie at my airplane base using something other than the needed 60 year old Pratt & Whitney tool;

"Hey bud, you're using the RIGHT tool for the LEFT job, there."

No matter how many tools you buy, some ass will design a new dealybob that requires a doohicky.

Darn engineers.

A picture of a DHC-2 Otter I took after work one day.

Whosethisguy wrote: A picture of a DHC-2 Otter I took after work one day.

You took that wow thats like the perfect picture moment right there

Trone187 wrote:

Whosethisguy wrote: A picture of a DHC-2 Otter I took after work one day.

You took that wow thats like the perfect picture moment right there

Wow whose thats a great pic. Can I use that for my screen saver?

Thanks guys, kinda low res but have at it. Been meaning to post lots of pics from the Seaplane base but i need to get an external harddrive plugged into my ancient laptop.

Many crazy photos for you gearheads. F'ed up engine parts like grenaded heads and superchargers and all kinds of fun.

Coming soon....

Thx McFate ,DrDave , and suxxor i needed a good relaxing game. Its always good to just mess around sometimes thx guys

Whosethisguy wrote: Thanks guys, kinda low res but have at it. Been meaning to post lots of pics from the Seaplane base but i need to get an external harddrive plugged into my ancient laptop.

Many crazy photos for you gearheads. F'ed up engine parts like grenaded heads and superchargers and all kinds of fun.

Coming soon....

Cant wait to see those!!

Man im.sorry raptor we were both chasing the same guy and i turned and hit you .! Ugh sorry

This is my problem, this is the transmission cooling line. This fitting is like a fuel line connection (I have that tool doesn't fit). So if anyone has a idea on how to remove it. I know I could modify my fuel line tool, but I don't want to destroy it. Because that would be the next thing that went wrong and then no tool for that lol.

Help has arrived

bhfoust wrote: This is my problem, this is the transmission cooling line. This fitting is like a fuel line connection (I have that tool doesn't fit). So if anyone has a idea on how to remove it. I know I could modify my fuel line tool, but I don't want to destroy it. Because that would be the next thing that went wrong and then no tool for that lol.

A bigger hammer.

Does this help

www.jeepforum.com/forum/f11/removing-tra...nes-radiator-332825/

bhfoust wrote: Thx McFate ,DrDave , and suxxor i needed a good relaxing game. Its always good to just mess around sometimes thx guys

It was great getting high with you guys last night .
so, what was the max? 4100?

McFate wrote:

bhfoust wrote: Thx McFate ,DrDave , and suxxor i needed a good relaxing game. Its always good to just mess around sometimes thx guys

It was great getting high with you guys last night .
so, what was the max? 4100?

Thats what I hit but couldn't get screen shot because it nosedived instantly lol

SnidleyWhiplash wrote: Does this help

www.jeepforum.com/forum/f11/removing-tra...nes-radiator-332825/

Says I have to get a tool, or cut it and replace with pcs of brake line. The only problem is I will have to walk 2 miles to parts store ugh. Thanks whip at least I have some options. O wait my neighbor's have a jeep lol jk

bhfoust wrote:

SnidleyWhiplash wrote: Does this help

www.jeepforum.com/forum/f11/removing-tra...nes-radiator-332825/

Says I have to get a tool, or cut it and replace with pcs of brake line. The only problem is I will have to walk 2 miles to parts store ugh. Thanks whip at least I have some options. O wait my neighbor's have a jeep lol jk

I thought one post said something about squeezing it with pliers etc...

bh being a car guy try this inside that fitting there are little prongs that fold in that fold in take a small flat head screwdriver push in on the fitting to push it away from the from the collar and then stick the screwdriver in and you will feel the little prongs in there and work the screwdriver around the inside of the fitting until you feel the little prongs go backwords it may take some doing and finesssing but i have done it many times and it will work with no damage to the fitting ill stay on here let me know what happens and i will try to walk you through it

dont squeeze it with pliers you could damage it and it will leak

I just loaded new update and I can not even calibrate. To make little plane level I have to hold phone in upright position instead of on its side. Do I have to learn how to fly sideways (sarcasm)? Ive looked through forum and have yet to see this question asked. I am on iphone 5. Help please.

BTJ582 wrote: I just loaded new update and I can not even calibrate. To make little plane level I have to hold phone in upright position instead of on its side. Do I have to learn how to fly sideways (sarcasm)? Ive looked through forum and have yet to see this question asked. I am on iphone 5. Help please.

BT! Hiya bud, I just got an IPhone yesterday, lastnight I had the same exact issue, today gone:) no idea what changed though. Not real happy with the apple platform. Anyway good luck!

BTW do you know how to take a screen shot?

BTJ582 wrote: I just loaded new update and I can not even calibrate. To make little plane level I have to hold phone in upright position instead of on its side. Do I have to learn how to fly sideways (sarcasm)? Ive looked through forum and have yet to see this question asked. I am on iphone 5. Help please.

You have to get it close and save, then go back to settings and do it again and again until you get to a comfortable position, also set sensitivity to half it will fly better.

bhfoust wrote: This is my problem, this is the transmission cooling line. This fitting is like a fuel line connection (I have that tool doesn't fit). So if anyone has a idea on how to remove it. I know I could modify my fuel line tool, but I don't want to destroy it. Because that would be the next thing that went wrong and then no tool for that lol.

pm bware he is a mechanic at ford

snobumm1 wrote: Man im.sorry raptor we were both chasing the same guy and i turned and hit you .! Ugh sorry

No worries my man!!! Just got a new phone and havering issues flying. I was hoping to make some adjustment and return to game in hopes of a totall domination by Misfits, similar to the game we had the other night!!!

bzerkbzerk wrote:

BTJ582 wrote: I just loaded new update and I can not even calibrate. To make little plane level I have to hold phone in upright position instead of on its side. Do I have to learn how to fly sideways (sarcasm)? Ive looked through forum and have yet to see this question asked. I am on iphone 5. Help please.

You have to get it close and save, then go back to settings and do it again and again until you get to a comfortable position, also set sensitivity to half it will fly better.

Thanks BZ!!! That's helping!!!! Friggin finally!!!!!!!

jdrock123 wrote: bh being a car guy try this inside that fitting there are little prongs that fold in that fold in take a small flat head screwdriver push in on the fitting to push it away from the from the collar and then stick the screwdriver in and you will feel the little prongs in there and work the screwdriver around the inside of the fitting until you feel the little prongs go backwords it may take some doing and finesssing but i have done it many times and it will work with no damage to the fitting ill stay on here let me know what happens and i will try to walk you through it

Yes Foust, do that. You could also "fabricate" a tool using an old plastic oil bottle. Cut a strip off the bottle to wrap & fit inside connector. I think there is 2 tabs that need to be released to remove line. I would try using a small screwdriver or pick to release them first, if that doesnt work fab the tool.
good luck,
-b

I think there are four tabs according the diagram I looked at 12 3 6 and 9 o'clock positions

Whosethisguy wrote:

bzerkbzerk wrote:

BTJ582 wrote: Hey Raptor, I have Iphone 5 and it seems the fire button will shift game to game. Test fire at beg to find sweet spot. For my phone press the center home button and on/off button on the top at same time and you can take a screen shot. Also I am to old and/or to stupid to figure out how to make a banner. I have read the instructions on thread and they might as well be written in Russian. Any help?

Same with my iphone, on off button and center button on bottom of phone at the same time for screen shot. Takes getting used to, you will probably throw your self out of game until you get it down.

Lol you know your an ace photographer when you can swipe screen for a side shot while pushing power and home button all at once. I boot myself a lot doing this:)

Thank you guys!!! And yes it took a couple times too stop booting myself....... So if we're in game and I suddenly vanish, it's probably not from Rage (I said probably), just from taking pic!!!


Mr foust, I had a Dodge Ram with the same train coolant thru radiator crap as you, hope you got it taken care of, but if not, you live close to a real good problem solver! Get it to the top of superstition mountain... Put it in N make sure family members are out.... And giver a little push..... (Important note here, u have to act surprised when maricopa search and rescue arrive, otherwise they may not give you a ride home!).

Pinal county out there isn't it? it's been a couple years I forget. Still the fake shock is critical for the ride home man.